我需要大家高手们能给我翻以下这个技术要求(机械加工图纸的技术要求)!REMARKS:1.Gradual transitions less then 0.05mm are allowed on surface "D".2.Cylindrical surface "D" check with calibrated gauge 直径116.7(-0.05,0)X1
来源:学生作业帮助网 编辑:作业帮 时间:2024/07/04 15:24:55
![我需要大家高手们能给我翻以下这个技术要求(机械加工图纸的技术要求)!REMARKS:1.Gradual transitions less then 0.05mm are allowed on surface](/uploads/image/z/7999903-55-3.jpg?t=%E6%88%91%E9%9C%80%E8%A6%81%E5%A4%A7%E5%AE%B6%E9%AB%98%E6%89%8B%E4%BB%AC%E8%83%BD%E7%BB%99%E6%88%91%E7%BF%BB%E4%BB%A5%E4%B8%8B%E8%BF%99%E4%B8%AA%E6%8A%80%E6%9C%AF%E8%A6%81%E6%B1%82%EF%BC%88%E6%9C%BA%E6%A2%B0%E5%8A%A0%E5%B7%A5%E5%9B%BE%E7%BA%B8%E7%9A%84%E6%8A%80%E6%9C%AF%E8%A6%81%E6%B1%82%EF%BC%89%21REMARKS%3A1.Gradual+transitions+less+then+0.05mm+are+allowed+on+surface+%22D%22.2.Cylindrical+surface+%22D%22+check+with+calibrated+gauge+%E7%9B%B4%E5%BE%84116.7%28-0.05%2C0%29X1)
我需要大家高手们能给我翻以下这个技术要求(机械加工图纸的技术要求)!REMARKS:1.Gradual transitions less then 0.05mm are allowed on surface "D".2.Cylindrical surface "D" check with calibrated gauge 直径116.7(-0.05,0)X1
我需要大家高手们能给我翻以下这个技术要求(机械加工图纸的技术要求)!
REMARKS:
1.Gradual transitions less then 0.05mm are allowed on surface "D".
2.Cylindrical surface "D" check with calibrated gauge 直径116.7(-0.05,0)X1000mm.
3.Hardness test on surface "E".
注:英文中,"E","D"分别是指两个圆柱表面,“直径116.7(-0.05,0)”,这部分相信一个搞机械方面的设计师和工艺师都能看懂!
如果可以的话,高手可以留下联系方式,我好同您进一步交流,跟您学习!
我需要大家高手们能给我翻以下这个技术要求(机械加工图纸的技术要求)!REMARKS:1.Gradual transitions less then 0.05mm are allowed on surface "D".2.Cylindrical surface "D" check with calibrated gauge 直径116.7(-0.05,0)X1
要求
1.在D表面上的逐渐过度不能大于0.05MM;
2.在1000MM范围内直径误差不大于0.05MM;
3.通过检验保证E表面的硬度;
qq26782454